• Omnipure Fluoride Removal Cartridge

Fluoride Water Filter Replacement – 9″ x 2.5″ Eco

Fluoride filter cartridge (9 Inch) suitable for both Doulton Twin Countertop Water Filter with fluoride removal and the Doulton Twin Under Sink Water Filter with Fluoride removal. Made in Taiwan and an economical alternative to the Omnipure XF834.

The Activated Alumina Cartridge utilizes a highly porous filter media to selectively adsorb fluoride ions, resulting in effective fluoride reduction from water sources.

The fine-mesh Activated Alumina contains an abundance of micro-pores with a high surface area. As water passes through, fluoride ions are drawn to and attach to the porous media’s oxidized surface sites through a chemical/physical adsorption process.

Each pore and surface site acts as an adsorption point to capture free fluoride ions, systematically removing them from the water. This process leads to thorough fluoride reduction of up to 99.9%.

Through the selective adsorption capacities of the Activated Alumina, the cartridge provides an efficient method for decreasing concerning levels of fluoride often present in public water supplies. The media chemically attracts and binds the fluoride ions to deliver water with significantly reduced fluoride content.

Please Note: when changing the fluoride cartridge it is important that the fluoride cartridge is flushed alone to prevent it from flushing into the next stages of filtration.  Flush water through this cartridge in the system for 10-15 minutes before adding the next stages. View Instructions.

 

Specifications:

  • Flow Rate: 10 litres per min
  • Filter life: 1,800 litres or 12 months
  • Size: 2.5″ x 9″ or 2.5″ x 10″, suitable for most standard size housings
  • Micron: 5 micron*

$59.00 inc. GST

SKU: IT004520 Category:

Description

How to Install and Flush the Fluoride Removal Replacement Cartridge

Follow these crucial steps to ensure optimal performance and the best-tasting filtered water: 

  1. Unpack the new fluoride replacement cartridge.
  2. Connect it to your water filter system, but don’t turn on the water yet.
  3. Remove all filtration cartridges that come after the fluoride removal cartridge (typically in position 1 or 2). Handle the ceramic cartridge with care, as if it were an egg.
  4. Install only the fluoride removal cartridge, then turn on the water and check for leaks.
  5. Flush the system for 20 minutes with only the fluoride cartridge installed. If desired, you can collect this water for plants.
  6. Turn off the water supply and open the faucet to release pressure and drain.
  7. Reinstall the other cartridges in their original positions.
  8. Tighten all housings and turn the water supply back on. Check for leaks.
  9. Flush the entire system for 10 minutes.
  10. After 12 hours, flush the system again for 3 minutes. 

Your water filter is now ready for use.

Reviews

There are no reviews yet.

Be the first to review “Fluoride Water Filter Replacement – 9″ x 2.5″ Eco”

Your email address will not be published. Required fields are marked *