Polyspun Pre Filter 1 Micron

These cartridges are constructed using spun-bonded polypropylene, a manufacturing method that eliminates the need for a central core. This design enhances filter performance by avoiding internal restrictions. The material also acts as a durable barrier against bacterial and chemical impacts, preventing the accumulation of unwanted substances such as algae.

These sediment filters are versatile, compatible with a wide range of liquids, and excel in removing sediment, rust, sand, silt, and algae.

It is advisable to replace the cartridge every 6 to 12 months, depending on water quality and usage levels.

• Designed as a pre-filter for initial filtration stages
• Dimensions: 2.5″ x 9″ or 2.5″ x 10″, compatible with most standard housings
• Filtration rating: 1 micron*

*The micron rating of a filter cartridge indicates its ability to trap particles of a specific size. For instance, a “10-micron” filter can capture particles as small as 10 micrometers. While the micron rating provides guidance on selecting the appropriate filter based on your water source, it does not define the exact efficiency of the filter’s contaminant-holding capacity.

Replacement of this cartridge is recommended approximately every 6-12 months, dependent on usage and the water quality.